Dear All,
When I open SimLabel in MATLB R2018b I get the following error message:
]
Error using ==
Matrix dimensions must agree.
Error in simlabel (line 263)
halltoolbar(halltoolbar==hzoomin)=[];%supprime 1 handle a conserver
Your assistance is appreciated.
Klaus
SimLabel: a GUI to simulate cw EPR from spin labeling
Re: SimLabel: a GUI to simulate cw EPR from spin labeling
An updated version is available!
Just replace the previous files...
WARNING! At the moment, SimLabel does not run on Matlab R2018b but should run on any previous Matlab release...
What's new:
- some minor bugs were fixed: loading Magnettech files, opening documentation on Mac.
- some minor improvements: in Slow Motion mode, lw=[0,0] is the default value; determination of magnetic field shift facilitated if a g-marker is present.
- linewidth called broadening in Slow Motion.
- updated documentation.
Suscribe this topic at the bottom of this page to be aware of new version!
More details on SimLabel in the following publication:
Etienne at al, 2017, Magnetic Resnance in Chemistry, DOI: 10.1002/mrc.4578 (http://dx.doi.org/10.1002/mrc.4578)
If you use results obtained with the help of SimLabel in any scientific publication, please cite this paper and Stoll et al, J. Magn. Reson. 178(1), 42-55 (2006).
Just replace the previous files...
WARNING! At the moment, SimLabel does not run on Matlab R2018b but should run on any previous Matlab release...
What's new:
- some minor bugs were fixed: loading Magnettech files, opening documentation on Mac.
- some minor improvements: in Slow Motion mode, lw=[0,0] is the default value; determination of magnetic field shift facilitated if a g-marker is present.
- linewidth called broadening in Slow Motion.
- updated documentation.
Suscribe this topic at the bottom of this page to be aware of new version!
More details on SimLabel in the following publication:
Etienne at al, 2017, Magnetic Resnance in Chemistry, DOI: 10.1002/mrc.4578 (http://dx.doi.org/10.1002/mrc.4578)
If you use results obtained with the help of SimLabel in any scientific publication, please cite this paper and Stoll et al, J. Magn. Reson. 178(1), 42-55 (2006).
Last edited by Emilien on Fri Mar 08, 2019 8:24 am, edited 2 times in total.
Re: SimLabel: a GUI to simulate cw EPR from spin labeling
Dear Emilien,
SimLabel works well for analyzing our data, thank you.
Do you have a version that can read experimental data as ASCII file?
Sincerely,
Klaus Gawrisch
SimLabel works well for analyzing our data, thank you.
Do you have a version that can read experimental data as ASCII file?
Sincerely,
Klaus Gawrisch
Re: SimLabel: a GUI to simulate cw EPR from spin labeling
Dear Klaus,
SimLabel needs also the frequency to work,which is probably not included in your ascii file.
Nevertheless, after loading your file in matlab, you can use the eprsave function of easyspin (http://easyspin.org/easyspin/documentation/eprsave.html) to generate DTA and DSC file including the frequency and readable by SimLabel.
sincerely,
Emilien
SimLabel needs also the frequency to work,which is probably not included in your ascii file.
Nevertheless, after loading your file in matlab, you can use the eprsave function of easyspin (http://easyspin.org/easyspin/documentation/eprsave.html) to generate DTA and DSC file including the frequency and readable by SimLabel.
sincerely,
Emilien
Re: SimLabel: a GUI to simulate cw EPR from spin labeling
Dear all,
I am running MATLAB R2018b and have the latest update for SimLabel (Jan2019). But I have the same problem Klaus described.
When I open SimLabel I get the following error message:
]
Error using ==
Matrix dimensions must agree.
Error in simlabel (line 263)
halltoolbar(halltoolbar==hzoomin)=[];%supprime 1 handle a conserver
The SimLabel main does open but if I try to do anything with it I get more error messages.
I appreciate any advice about what I am doing wrong.
Thank you - Annette
I am running MATLAB R2018b and have the latest update for SimLabel (Jan2019). But I have the same problem Klaus described.
When I open SimLabel I get the following error message:
]
Error using ==
Matrix dimensions must agree.
Error in simlabel (line 263)
halltoolbar(halltoolbar==hzoomin)=[];%supprime 1 handle a conserver
The SimLabel main does open but if I try to do anything with it I get more error messages.
I appreciate any advice about what I am doing wrong.
Thank you - Annette
Re: SimLabel: a GUI to simulate cw EPR from spin labeling
Dear Annette,
just above the link you used to download the zip, you can read:
Emilien
If you use results obtained with the help of SimLabel in any scientific publication, please cite Etienne at al, 2017, Magnetic Resnance in Chemistry, DOI: 10.1002/mrc.4578 (http://dx.doi.org/10.1002/mrc.4578) and Stoll et al, J. Magn. Reson. 178(1), 42-55 (2006).
just above the link you used to download the zip, you can read:
I need time to fix this issue to enable SimLabel to run on Matlab R2018b. I hope soon...WARNING! At the moment, SimLabel does not run on Matlab R2018b but should run on any previous Matlab release...
Emilien
If you use results obtained with the help of SimLabel in any scientific publication, please cite Etienne at al, 2017, Magnetic Resnance in Chemistry, DOI: 10.1002/mrc.4578 (http://dx.doi.org/10.1002/mrc.4578) and Stoll et al, J. Magn. Reson. 178(1), 42-55 (2006).
Re: SimLabel: a GUI to simulate cw EPR from spin labeling
Dear Emilien,
Sorry I missed this. Thank you for the fast response. I appreciate all your effort. Thank you!
Annette
Sorry I missed this. Thank you for the fast response. I appreciate all your effort. Thank you!
Annette
Re: SimLabel: a GUI to simulate cw EPR from spin labeling
An updated version is available!
Just replace the previous files...
What's new:
SimLabel run on Matlab R2018b and on any previous Matlab release.
Suscribe this topic at the bottom of this page to be aware of new version!
More details on SimLabel in the following publication:
Etienne at al, 2017, Magnetic Resnance in Chemistry, DOI: 10.1002/mrc.4578 (http://dx.doi.org/10.1002/mrc.4578)
If you use results obtained with the help of SimLabel in any scientific publication, please cite this paper and Stoll et al, J. Magn. Reson. 178(1), 42-55 (2006).
Just replace the previous files...
What's new:
SimLabel run on Matlab R2018b and on any previous Matlab release.
Suscribe this topic at the bottom of this page to be aware of new version!
More details on SimLabel in the following publication:
Etienne at al, 2017, Magnetic Resnance in Chemistry, DOI: 10.1002/mrc.4578 (http://dx.doi.org/10.1002/mrc.4578)
If you use results obtained with the help of SimLabel in any scientific publication, please cite this paper and Stoll et al, J. Magn. Reson. 178(1), 42-55 (2006).
Re: SimLabel: a GUI to simulate cw EPR from spin labeling
Hey, I am using R2018B MTLAB version and the newest easyspin software (5.2.25). I installed the newest version of SimLabel as well, and wherever I click I get an error like this:
Error in simlabel/addcomponent (line 2165)
hfig=opencomponentwin; % ouverture d'une nouvelle fenetre de composante
SimLabel_X
Error while evaluating UIControl Callback.
What can I do about it?
Error in simlabel/addcomponent (line 2165)
hfig=opencomponentwin; % ouverture d'une nouvelle fenetre de composante
SimLabel_X
Error while evaluating UIControl Callback.
What can I do about it?
Re: SimLabel: a GUI to simulate cw EPR from spin labeling
Hi,
I can not reproduce this issue. Tell me more about your configuration: Matlab release (2018a or b), Windows10,7? Linux? Mac?
Is it your first time with simlabel?
Emilien
I can not reproduce this issue. Tell me more about your configuration: Matlab release (2018a or b), Windows10,7? Linux? Mac?
Is it your first time with simlabel?
Emilien