eprload with specman files

A place to report and discuss potential bugs
Post Reply
Matt Krzyaniak
EasySpin Guru
Posts: 153
Joined: Tue Jul 22, 2014 11:01 am
Location: Northwestern University

eprload with specman files

Post by Matt Krzyaniak »

In ES 5.0.x the ability of eprload to import specman files into MATLAB was greatly extended. If you're running into problems, e.g. what was working before isn't now, it wasn't doing what you wanted before and it still doesn't.

Please upload an example file or two(include both the .d01 and .exp) into this thread so I can work out the bugs.

Thanks
iliak
User
Posts: 10
Joined: Wed May 11, 2016 9:40 am

Re: eprload with specman files

Post by iliak »

Hi,

I tried to use eprload from the EasySpin 5.0.21 version and it failed with several 2D files recorded recently with SpecMan. Same file is successfully opened with eprload from ver 4.5.5. An example file is attached. Thanks for your help.

Ilia
Attachments
example.zip
expected outcome is a 2D matrix with dimensions of 5000x8
(221.05 KiB) Downloaded 341 times
Stefan Stoll
EasySpin Creator
Posts: 1041
Joined: Mon Jul 21, 2014 10:11 pm
Location: University of Washington

Re: eprload with specman files

Post by Stefan Stoll »

This issue should be fixed in 5.0.22. Let us know if you still get errors.
iliak
User
Posts: 10
Joined: Wed May 11, 2016 9:40 am

Re: eprload with specman files

Post by iliak »

Works not (5.0.22)!

Thanks
Stefan Stoll
EasySpin Creator
Posts: 1041
Joined: Mon Jul 21, 2014 10:11 pm
Location: University of Washington

Re: eprload with specman files

Post by Stefan Stoll »

Please let us know what is not working (e.g. post any error messages that are issued).
iliak
User
Posts: 10
Joined: Wed May 11, 2016 9:40 am

Re: eprload with specman files

Post by iliak »

What a particularly nasty typo, I meant "works now!".

My sincere apologies
Stefan Stoll
EasySpin Creator
Posts: 1041
Joined: Mon Jul 21, 2014 10:11 pm
Location: University of Washington

Re: eprload with specman files

Post by Stefan Stoll »

Thanks for the clarification!
Post Reply